| The Rollbak tonneau cover has so many features I | | | | anywhere you want. The Rollbak truck bed cover |
| could probably sit here and type all day long about it. | | | | locks automatically when closed all the way. There is |
| I will try to resist myself and make this short and | | | | no visible latch or locking system as it latches |
| sweet. The Rollbak truck bed cover is made by Bak | | | | underneath the tonneau cover. You have to open |
| Industries and is one tough tonneau cover. | | | | the tailgate to access the latch for the truck bed |
| It is a retractable tonneau cover which retracts into | | | | cover. Then if you install a locking tailgate latch your |
| a canister behind the truck cab. The canister is made | | | | tonneau cover is a very secure storage area. You |
| of a rugged ABS which is very durable and with its | | | | can lift or lower the tailgate without moving the |
| rounded design is made to expel water. The average | | | | tonneau cover and the stake holes along the side of |
| canister is about 8.5 inches in diameter and some are | | | | your truck bed remain uncovered which is great for |
| even smaller which leaves you with an added space | | | | any type of rack you use or tie downs. |
| under the canister in the front of the truck bed. | | | | The powder coat flat paint is a very durable finish |
| The side rails are lined with high density polyethylene | | | | which you can wax as you would the rest of your |
| which is even better than Teflon as Teflon freezes. | | | | truck body. The installation is a no drill clamp system, |
| You never have to grease this, and it will work well in | | | | but many applications use two self tapping screws at |
| all types of weather. Hot, cold, wet or dry, this cover | | | | the front inside corners. |
| is made for all weather. | | | | Listening to testimonials, mostly everyone loved the |
| The slats of the rollback retractable tonneau cover | | | | look and action of the Rollbak tonneau cover. |
| are made of powder coated industrial strength | | | | However they pretty much all had a problem with |
| aluminum strong enough to withstand over 400 | | | | the instructions that came with the truck bed cover. |
| pounds. The slats are designed to channel water to | | | | They were pretty vague and conflicted with the |
| the side tracks and then to the ABS canister and | | | | installation video on the Bak Industries website. It |
| then out the bottom of the truck through hoses. | | | | seems they were all able to get through the |
| The way the slats are designed, even if any water | | | | installation but would be much faster at it if they had |
| does get through the surface of the slats, it is still | | | | to do it again. Even with the poor installation |
| channeled to the side tracks. | | | | instructions they all said it was worth the troubles |
| The system is designed to stop every twelve inches | | | | once they had it on. |
| as you close it so you can close it pretty much | | | | |